MOO-Slick Silicone Spray

Product Description

The One You Reach For First!

The RC Maintenance Foundation starts with MOO-Slick Silicone; a premium silicone-based lubricant, protectant, and release agent designed to reduce friction, repel moisture, ward off rust, and help keep dirt and debris from sticking to your RC. Trusted by racers, crawlers, bashers, and hobbyists alike, MOO-Slick Silicone has become the go-to maintenance spray for keeping vehicles cleaner, smoother, and better protected.

Unlike heavy lubricants that remain wet and attract dirt, MOO-Slick Silicone dries to a beautiful clean, matt gloss, non-tacky finish that helps mud, dust, grass, and debris slide or blow off rather than hold on for life. The result is less cleanup, smoother operation, reduced maintenance, and improved long-term protection for the parts that work hardest.

Perfect for bearings, drivetrain components, hinge pins, suspension parts, ball cups, pillow balls, exposed moving assemblies, and countless other applications, MOO-Slick Silicone creates a slick protective barrier that reduces friction & sticktion while helping defend against rust, corrosion, moisture, and environmental contaminants.

Its hydrophobic formula actively repels water and remains effective across a wide temperature range, making it an ideal choice for both routine maintenance and harsh operating conditions.

Whether you're preparing for race day, a muddy trail run, or simply maintaining your collection; MOO-Slick helps keep your RC looking and performing its best.

Because the cleaner your RC stays, the less time you spend cleaning it!

Features

• Premium silicone lubricant, protectant, and release agent
• Fast-drying, non-tacky finish
• Helps repel mud, dust, dirt, and debris
• Reduces friction and wear on moving parts
• Hydrophobic formula resists water and moisture
• Helps protect against rust and corrosion
• Safe for use on RC vehicles and components
• Heat stable up to 400°F (204°C)
• Won't freeze, melt, or wash away easily
• Helps reduce maintenance and extend component life

Ideal Applications

• Bearings
• Drivetrain components
• Suspension parts
• Hinge pins
• Shafts
• Ball cups
• Pillow balls
• Exposed moving assemblies
• General RC maintenance

Application Tips

A little goes a long way.

For general protection, apply a light even mist from approximately 12–16 inches (30–40cm) away and allow the product to cure before use. The goal is a thin, consistent coating—not a wet surface.

For high-friction components such as hinge pins, ball cups, pillow balls, and drivetrain components; a slightly heavier application may be used. Allow additional cure time for maximum effectiveness.

For Lexan bodies, spray onto a clean cloth first before wiping the surface. Avoid use on very old, overly dried out, or brittle plastics.

Avoid spraying directly into electronics.

Please Note: By law MOO-slick ships UPS Ground or USPS Parcel Select within the Continental United States & Canada ONLY!