Adhesives

10ml Cow-Formal Silicone Conformal Coating

Not just another cut down super thin multi coat application... In true CowRC fashion we bring you an INDUSTRIAL GRADE THICK Silicone Conformal Coating. The exact product relied upon in house by Holmes Hobbies to Waterproof their own customers'...

IC-LOC Blue Med Thread Locker (1.69oz.)

IC-LOC™ Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-LOC Blue™ is cured, the fasteners can be disassembled with standard hand tools if required.

IC-LOC Blue Med Thread Locker (.33oz.)

IC-LOC™ Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-LOC Blue™ is cured, the fasteners can be disassembled with standard hand tools if required.

Ultra-Cure Medium Tire Glue

Ultra-Cure™ is a very high performance clear cyanoacrylate that has a viscosity (thickness) in-between that of Insta-Cure Super Thin and Insta-Cure+ Gap Filling Medium. It is ideal for the mounting of rubber tires onto R/C car wheels. It is...

IC-LOC Purple Low Thread Locker (.33oz.)

IC-LOC™ Purple prevents loosening of small fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Purple seals and prevents rusting of threads.

2oz INSTA-SET Cyanoacrylate Accelerator F.S. Pump Spray

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from...

1oz IC-2000 Black Rubber Toughened Cyanoacrylate

IC-2000™ is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber, and other advanced materials. For...

Non-Clog CA Applicator (Regular Tip)

Regular Tip Non-Clog CA Applicator - #321 Regular Tip Non-clog 6" long pipette for the application of gap filling and extra thick CAs. CA is loaded by inserting into an open CA bottle with bulb compressed, similar to an eye dropper. 

2oz Insta-Cure+ Medium Gap Filling Cyanoacrylate

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface...

Extra CA Top

Extra CA Top - #312 Replacement top that is on all of BSI's non-pocket Cas. Tops can be soaked in acetone overnight to remove any buildup of CA on the inside and outside of the nozzle. 

1oz UN-CURE Cyanoacrylate Debonder

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone...

IC-LOC Green Wicking Thread Locker (.33oz.)

IC-LOC™ Green is a thin, medium-high strength threadlock that is applied to fasteners that are already assembled. IC-LOC Green™ wicks down into the threads of fasteners using capillary action and has good performance even with oil coated...