Product Description
50ml Cow-Formal Silicone Conformal Coating
Real waterproofing, built to keep up with you.
Now you can waterproof your electronics the right way, and keep doing it all season long. This 50ml bottle of Cow-Formal Silicone Conformal Coating is the exact same industrial-grade coating Holmes Hobbies relies on in-house to waterproof their own customers' electronics, not a cut-down, thinned-out multi-coat product like so many alternatives out there. This is a genuinely thick, industrial-strength formula, one proper application is typically all it takes, and at this size, you've got enough on hand to treat an entire army of ESCs or receivers.
Yes, it costs more than typical conformal coatings on the market, but it's not really a fair comparison. Most of what's out there is thin, cut down, and needs coat after coat, while this is a true industrial product that thinner alternatives simply can't match.
Each bottle is built for hobbyists and teams going through electronics at volume.
Specs:
- Net fill: 50ml
- Applicator brush included
Some tips from the team:
- Keep the bottle sealed tightly when not in use, since exposure to air can cause premature curing.
- The bottle's lid looks similar to a typical nail polish bottle, but when properly torqued down, you'll actually see the bottom of the lid compress and bow out slightly where it meets the glass, that's your visual cue you've got a proper seal.
Directions: Use in a well-ventilated area. Apply a layer to one side of clean, dry electronics. Wait 30 to 60 minutes for drying, rotate, and apply to the second side. Repeat as necessary to build a complete seal against the elements.
⚠ Contains toluene. Flammable. Harmful if swallowed or inhaled. Keep out of reach of children. Avoid breathing vapors, and wash thoroughly after handling. Do not eat, drink, or smoke while using. Use only outdoors or in a well-ventilated area. If swallowed, call a poison center or seek medical attention immediately.
