Product Description
Everything you need, matched and ready to go.
This combo pairs a Carbon Series Rubber Pit Mat with a matching magnetic mat and a matching Solder Mat, three pieces of the same pit mat ecosystem, designed from the ground up to work together, bundled here at a real savings over buying them separately. The magnetic mat is built with a hard, square edge to make the most of the space inside the Carbon Series mat, and isn't sold anywhere else in the store on its own. The Solder Mat is heat resistant up to 900 degrees Fahrenheit, giving you a genuine soldering station for work the Carbon Series mat alone shouldn't be asked to handle, without risking damage from a stray drip or hot iron. And since these pieces are built to integrate within the ecosystem, this setup isn't the end of the road, it's a foundation you can keep building on as your needs change and grow.
One tip from the team: want to build on this setup even further? You can save 25% by adding the matching Carbon Series Upgrade Kit at checkout on this page instead of separately.
Landed here without checking out the individual product pages yet? There's a lot more to see, specs, integration options, and tips straight from the team. Click on any name below to take the full deep dive.
Includes:
Carbon Series Pit Mat (24" x 30")
| Spec | Detail |
|---|---|
| Dimensions | 24" x 30" |
| Pocket Depth | 1/4" |
| Wall Height | 7/16" |
| Floor Thickness | 3/16" |
| Wall Thickness | 5/16" |
| Weight | 88oz (5lb 8oz) |
| Hex Pattern Size | 5/16" |
| Pockets | 16 total — 8 per side (6 small center pockets for screws/small parts, 2 larger end pockets for tools/bigger parts), mirrored, vertically arranged |
| Material | Molded PVC rubber |
Optional: Carbon Series Upgrade Kit
Large Screw Catcher Flat Mat (19" x 24")
| Spec | Detail |
|---|---|
| Dimensions | 19" x 24" |
| Floor Thickness | 60 mil (0.06") |
| Weight | 64oz (4lb) |
| Material | ProMag reversed magnetic sheeting (matte white) |
| Spec | Detail |
|---|---|
| Weight | 40oz |
| Center Thickness | 1/8" |
| Outer Wall Height | 1/4" |
| Outer Wall Width | 1/4" |
| Hex Pattern Size | 11/16" |
| Integrated Ruler | 12" / 31cm |
| Heat Resistance | Up to 900°F |
| Color | Soft gray |
